Hard disk repair tools PCTOOLS

Track "0" is very important on your hard disk drive, the hard disk master boot record area (MBR). Track "0", once damaged, will severely damage the hard disk master boot program and partition table information, and the hard disk can not be boo. But we can use hard disk drive repair software DE (DiskEdit) to repair the track "0" damaged hard drive.

First download PCTools 9.0 to your local hard drive, because the file if very large in size, and can not be run in the FAT32 format hard drive, it would be better to burn it to a CD-ROM. Of course, if there is FAT16 formatted hard disk partition, PCTools can also be put on that partition.

Preparing a system boot floppy disk (or bootable CD-ROM), and put the boot disk into the floppy drive and restart the system (be sure to load the CD-ROM drive), and then insert the PCTools CD-ROM and enter the DE CD-ROM directory, then run the DE and enter the main interface, an information window will pop up to prompt DE run in read-only state. Press enter, the program prompts the user to select which file to open, just press enter to open the default document. After opening a document, press the Atl key to activate the function menu, select "Options (option) → Configuration (Configuration)" menu. Press Enter and enter the configuration window, use the "Tab" key to point the cursor onto the "Read Only" (read-only) option, and then press the space bar before the option "√" to disable it, finally press "OK" to Save your settings.

When return to the main interface, select "Select (select) → Drive (equipment)" menu, and then z list of drives appears, point the cursor to the "Physical" (physical disk), press the space bar to select it, then select the " Drives "(equipment) in column" Hard Disk "(hard disk) and press ENTER.

After return to the main interface, choose "Select → Partition Table (partition table)" menu, select and enter the hard disk partition table. If the hard disk has multiple partitions, then partition 1 is the C drive partition, the partition is started from the hard disk 0 cylinder. Now change the "Beginning Cylinder" (the starting cylinder) from 0 to 1.

After changes being made, press Enter, then the hard disk drive software will prompt asking whether to save the changes, select "Save" (Save) and press OK. Then you can press the Esc key to exit. Restart your computer, press the Del key to enter the BIOS settings, and it will automatically check BIOS hard drive settings, and you should be able to see the hard drive "Cylinder" (stigma) decreased 1 than the original, save and exit, re-partition, then format the hard drive, and the repair work is complete finished.